|
40268
|
25739
|
139
|
5
|
634f93cb2916e3fdff6788551b99b062d0335ce0
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 20
uses: actions/setup-node@v4
with:
cache: npm
node-version: 20.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844747
|
1791950482
|
|
0
|
|
0
|
Edit
Delete
|
|
40271
|
25740
|
139
|
5
|
634f93cb2916e3fdff6788551b99b062d0335ce0
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 20
uses: actions/setup-node@v4
with:
cache: npm
node-version: 20.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844747
|
1791950482
|
|
0
|
|
0
|
Edit
Delete
|
|
40274
|
25741
|
139
|
5
|
018cc2cf5baa6db3ef3c5f8a56943fffe632ef53
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 20
uses: actions/setup-node@v4
with:
cache: npm
node-version: 20.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844747
|
1791950482
|
|
0
|
|
0
|
Edit
Delete
|
|
40277
|
25742
|
139
|
5
|
018cc2cf5baa6db3ef3c5f8a56943fffe632ef53
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 20
uses: actions/setup-node@v4
with:
cache: npm
node-version: 20.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844748
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40280
|
25743
|
139
|
5
|
37930b1c2abaa49bbe596cd826c3c89aef350131
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 24
uses: actions/setup-node@v4
with:
cache: npm
node-version: 24.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844748
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40283
|
25744
|
139
|
5
|
37930b1c2abaa49bbe596cd826c3c89aef350131
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 24
uses: actions/setup-node@v4
with:
cache: npm
node-version: 24.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844748
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40286
|
25745
|
139
|
5
|
9000827ccba6bdab643e8b6fd33ac0654aef8333
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 24
uses: actions/setup-node@v4
with:
cache: npm
node-version: 24.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A (absolute path)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A (tilde expansion)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download artifact A without decompressing
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: skip-decompress-test
skip-decompress: "true"
- name: Verify skip-decompress download
run: |
$rawFile = "skip-decompress-test/Artifact-A-${{ matrix.runs-on }}.zip"
if(!(Test-Path -path $rawFile))
{
Write-Error "Expected raw artifact file does not exist at $rawFile"
}
$fileInfo = Get-Item $rawFile
if($fileInfo.Length -eq 0)
{
Write-Error "Downloaded artifact file is empty"
}
Write-Host "Successfully downloaded artifact without decompressing: $rawFile (size: $($fileInfo.Length) bytes)"
shell: pwsh
- name: Create and upload archived artifact with misleading extension
run: |
mkdir -p path/to/extension-test
echo '{"key": "value"}' > path/to/extension-test/data.json
shell: bash
- uses: actions/upload-artifact@v4
with:
name: report.txt-${{ matrix.runs-on }}.json
path: path/to/extension-test/data.json
- name: Download misleading-extension artifact without decompressing
uses: ./
with:
name: report.txt-${{ matrix.runs-on }}.json
path: ext-test/raw
skip-decompress: "true"
- name: Verify downloaded file has .zip extension appended
run: |
expected="ext-test/raw/report.txt-${{ matrix.runs-on }}.json.zip"
if [ -f "$expected" ]; then
echo "PASS: Downloaded file has .zip appended: $expected"
else
echo "FAIL: Expected $expected but got:"
ls -al ext-test/raw/
exit 1
fi
shell: bash
- name: Create artifacts with CJK names
run: |
mkdir -p path/to/cjk-artifacts
# Chinese - 土 (U+571F) known to fail, 日 (U+65E5) known to work
echo "Content for 土" > "path/to/cjk-artifacts/file-土-${{ matrix.runs-on }}.txt"
echo "Content for 中文测试" > "path/to/cjk-artifacts/file-中文测试-${{ matrix.runs-on }}.txt"
# Japanese - katakana and kanji
echo "Content for テスト" > "path/to/cjk-artifacts/file-テスト-${{ matrix.runs-on }}.txt"
echo "Content for 東京タワー" > "path/to/cjk-artifacts/file-東京タワー-${{ matrix.runs-on }}.txt"
# Korean - Hangul
echo "Content for 테스트" > "path/to/cjk-artifacts/file-테스트-${{ matrix.runs-on }}.txt"
echo "Content for 서울시" > "path/to/cjk-artifacts/file-서울시-${{ matrix.runs-on }}.txt"
shell: bash
- name: Upload CJK artifact - Chinese 土
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-土-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Chinese 中文测试
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-中文测试-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Japanese テスト
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-テスト-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Japanese 東京タワー
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-東京タワー-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Korean 테스트
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-테스트-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Korean 서울시
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-서울시-${{ matrix.runs-on }}.txt
- name: Download CJK artifact - Chinese 土
uses: ./
with:
name: file-土-${{ matrix.runs-on }}.txt
path: cjk-download/土
- name: Download CJK artifact - Chinese 中文测试
uses: ./
with:
name: file-中文测试-${{ matrix.runs-on }}.txt
path: cjk-download/中文测试
- name: Download CJK artifact - Japanese テスト
uses: ./
with:
name: file-テスト-${{ matrix.runs-on }}.txt
path: cjk-download/テスト
- name: Download CJK artifact - Japanese 東京タワー
uses: ./
with:
name: file-東京タワー-${{ matrix.runs-on }}.txt
path: cjk-download/東京タワー
- name: Download CJK artifact - Korean 테스트
uses: ./
with:
name: file-테스트-${{ matrix.runs-on }}.txt
path: cjk-download/테스트
- name: Download CJK artifact - Korean 서울시
uses: ./
with:
name: file-서울시-${{ matrix.runs-on }}.txt
path: cjk-download/서울시
- name: Verify CJK artifact downloads
run: |
set -e
fail=0
check_file() {
local file="$1"
local expected="$2"
if [ ! -f "$file" ]; then
echo "FAIL: Missing file: $file"
fail=1
return
fi
actual=$(cat "$file")
if [ "$actual" != "$expected" ]; then
echo "FAIL: Content mismatch in $file"
echo " Expected: '$expected'"
echo " Got: '$actual'"
fail=1
return
fi
echo "PASS: $file"
}
echo "=== Chinese ==="
check_file "cjk-download/土/file-土-${{ matrix.runs-on }}.txt" "Content for 土"
check_file "cjk-download/中文测试/file-中文测试-${{ matrix.runs-on }}.txt" "Content for 中文测试"
echo "=== Japanese ==="
check_file "cjk-download/テスト/file-テスト-${{ matrix.runs-on }}.txt" "Content for テスト"
check_file "cjk-download/東京タワー/file-東京タワー-${{ matrix.runs-on }}.txt" "Content for 東京タワー"
echo "=== Korean ==="
check_file "cjk-download/테스트/file-테스트-${{ matrix.runs-on }}.txt" "Content for 테스트"
check_file "cjk-download/서울시/file-서울시-${{ matrix.runs-on }}.txt" "Content for 서울시"
if [ "$fail" -ne 0 ]; then
echo "Some CJK artifact checks failed"
ls -alR cjk-download/ || true
exit 1
fi
echo "All CJK artifact downloads verified successfully"
shell: bash
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844748
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40289
|
25746
|
139
|
5
|
70fc10c6e5e1ce46ad2ea6f2b72d43f7d47b13c3
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 24
uses: actions/setup-node@v4
with:
cache: npm
node-version: 24.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A (absolute path)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A (tilde expansion)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download artifact A without decompressing
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: skip-decompress-test
skip-decompress: "true"
- name: Verify skip-decompress download
run: |
$rawFile = "skip-decompress-test/Artifact-A-${{ matrix.runs-on }}.zip"
if(!(Test-Path -path $rawFile))
{
Write-Error "Expected raw artifact file does not exist at $rawFile"
}
$fileInfo = Get-Item $rawFile
if($fileInfo.Length -eq 0)
{
Write-Error "Downloaded artifact file is empty"
}
Write-Host "Successfully downloaded artifact without decompressing: $rawFile (size: $($fileInfo.Length) bytes)"
shell: pwsh
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844748
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40292
|
25747
|
139
|
5
|
3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 24
uses: actions/setup-node@v4
with:
cache: npm
node-version: 24.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A (absolute path)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A (tilde expansion)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download artifact A without decompressing
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: skip-decompress-test
skip-decompress: "true"
- name: Verify skip-decompress download
run: |
$rawFile = "skip-decompress-test/Artifact-A-${{ matrix.runs-on }}.zip"
if(!(Test-Path -path $rawFile))
{
Write-Error "Expected raw artifact file does not exist at $rawFile"
}
$fileInfo = Get-Item $rawFile
if($fileInfo.Length -eq 0)
{
Write-Error "Downloaded artifact file is empty"
}
Write-Host "Successfully downloaded artifact without decompressing: $rawFile (size: $($fileInfo.Length) bytes)"
shell: pwsh
- name: Create and upload archived artifact with misleading extension
run: |
mkdir -p path/to/extension-test
echo '{"key": "value"}' > path/to/extension-test/data.json
shell: bash
- uses: actions/upload-artifact@v4
with:
name: report.txt-${{ matrix.runs-on }}.json
path: path/to/extension-test/data.json
- name: Download misleading-extension artifact without decompressing
uses: ./
with:
name: report.txt-${{ matrix.runs-on }}.json
path: ext-test/raw
skip-decompress: "true"
- name: Verify downloaded file has .zip extension appended
run: |
expected="ext-test/raw/report.txt-${{ matrix.runs-on }}.json.zip"
if [ -f "$expected" ]; then
echo "PASS: Downloaded file has .zip appended: $expected"
else
echo "FAIL: Expected $expected but got:"
ls -al ext-test/raw/
exit 1
fi
shell: bash
- name: Create artifacts with CJK names
run: |
mkdir -p path/to/cjk-artifacts
# Chinese - 土 (U+571F) known to fail, 日 (U+65E5) known to work
echo "Content for 土" > "path/to/cjk-artifacts/file-土-${{ matrix.runs-on }}.txt"
echo "Content for 中文测试" > "path/to/cjk-artifacts/file-中文测试-${{ matrix.runs-on }}.txt"
# Japanese - katakana and kanji
echo "Content for テスト" > "path/to/cjk-artifacts/file-テスト-${{ matrix.runs-on }}.txt"
echo "Content for 東京タワー" > "path/to/cjk-artifacts/file-東京タワー-${{ matrix.runs-on }}.txt"
# Korean - Hangul
echo "Content for 테스트" > "path/to/cjk-artifacts/file-테스트-${{ matrix.runs-on }}.txt"
echo "Content for 서울시" > "path/to/cjk-artifacts/file-서울시-${{ matrix.runs-on }}.txt"
shell: bash
- name: Upload CJK artifact - Chinese 土
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-土-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Chinese 中文测试
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-中文测试-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Japanese テスト
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-テスト-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Japanese 東京タワー
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-東京タワー-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Korean 테스트
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-테스트-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Korean 서울시
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-서울시-${{ matrix.runs-on }}.txt
- name: Download CJK artifact - Chinese 土
uses: ./
with:
name: file-土-${{ matrix.runs-on }}.txt
path: cjk-download/土
- name: Download CJK artifact - Chinese 中文测试
uses: ./
with:
name: file-中文测试-${{ matrix.runs-on }}.txt
path: cjk-download/中文测试
- name: Download CJK artifact - Japanese テスト
uses: ./
with:
name: file-テスト-${{ matrix.runs-on }}.txt
path: cjk-download/テスト
- name: Download CJK artifact - Japanese 東京タワー
uses: ./
with:
name: file-東京タワー-${{ matrix.runs-on }}.txt
path: cjk-download/東京タワー
- name: Download CJK artifact - Korean 테스트
uses: ./
with:
name: file-테스트-${{ matrix.runs-on }}.txt
path: cjk-download/테스트
- name: Download CJK artifact - Korean 서울시
uses: ./
with:
name: file-서울시-${{ matrix.runs-on }}.txt
path: cjk-download/서울시
- name: Verify CJK artifact downloads
run: |
set -e
fail=0
check_file() {
local file="$1"
local expected="$2"
if [ ! -f "$file" ]; then
echo "FAIL: Missing file: $file"
fail=1
return
fi
actual=$(cat "$file")
if [ "$actual" != "$expected" ]; then
echo "FAIL: Content mismatch in $file"
echo " Expected: '$expected'"
echo " Got: '$actual'"
fail=1
return
fi
echo "PASS: $file"
}
echo "=== Chinese ==="
check_file "cjk-download/土/file-土-${{ matrix.runs-on }}.txt" "Content for 土"
check_file "cjk-download/中文测试/file-中文测试-${{ matrix.runs-on }}.txt" "Content for 中文测试"
echo "=== Japanese ==="
check_file "cjk-download/テスト/file-テスト-${{ matrix.runs-on }}.txt" "Content for テスト"
check_file "cjk-download/東京タワー/file-東京タワー-${{ matrix.runs-on }}.txt" "Content for 東京タワー"
echo "=== Korean ==="
check_file "cjk-download/테스트/file-테스트-${{ matrix.runs-on }}.txt" "Content for 테스트"
check_file "cjk-download/서울시/file-서울시-${{ matrix.runs-on }}.txt" "Content for 서울시"
if [ "$fail" -ne 0 ]; then
echo "Some CJK artifact checks failed"
ls -alR cjk-download/ || true
exit 1
fi
echo "All CJK artifact downloads verified successfully"
shell: bash
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844749
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40295
|
25748
|
139
|
5
|
9000827ccba6bdab643e8b6fd33ac0654aef8333
|
0
|
Build (macos-latest)
|
0
|
name: Test
"on":
push:
paths-i name: Test
"on":
push:
paths-ignore:
- '**.md'
pull_request:
paths-ignore:
- '**.md'
jobs:
build:
name: Build (macos-latest)
runs-on: macos-latest
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Setup Node 24
uses: actions/setup-node@v4
with:
cache: npm
node-version: 24.x
- name: npm install
run: npm install
- name: Compile
run: npm run build
- name: Lint
run: npm run lint
- name: Format
run: npm run format-check
- name: Run Unit Tests
run: npm test
- name: Create artifacts
run: |
mkdir -p path/to/artifact-A
mkdir -p path/to/artifact-B
echo "Lorem ipsum dolor sit amet" > path/to/artifact-A/file-A.txt
echo "Hello world from file B" > path/to/artifact-B/file-B.txt
- name: Upload artifact A
uses: actions/upload-artifact@v4
with:
name: Artifact-A-${{ matrix.runs-on }}
path: path/to/artifact-A
- name: Upload artifact B
uses: actions/upload-artifact@v4
with:
name: Artifact-B-${{ matrix.runs-on }}
path: path/to/artifact-B
- name: Download artifact A (absolute path)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: some/new/path
- name: Download artifact A (tilde expansion)
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: ~/some/path/with/a/tilde
- name: Verify successful download
run: |
$file1 = "some/new/path/file-A.txt"
$file2 = "~/some/path/with/a/tilde/file-A.txt"
if(!(Test-Path -path $file1) -or !(Test-Path -path $file2))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $file1) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $file2) -ceq "Lorem ipsum dolor sit amet"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
path: some/other/path
- name: Verify successful download
run: |
$fileA = "some/other/path/Artifact-A-${{ matrix.runs-on }}/file-A.txt"
$fileB = "some/other/path/Artifact-B-${{ matrix.runs-on }}/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download all Artifacts
uses: ./
with:
merge-multiple: "true"
path: single/directory
pattern: Artifact-*
- name: Verify successful download
run: |
$fileA = "single/directory/file-A.txt"
$fileB = "single/directory/file-B.txt"
if(!(Test-Path -path $fileA) -or !(Test-Path -path $fileB))
{
Write-Error "Expected files do not exist"
}
if(!((Get-Content $fileA) -ceq "Lorem ipsum dolor sit amet") -or !((Get-Content $fileB) -ceq "Hello world from file B"))
{
Write-Error "File contents of downloaded artifacts are incorrect"
}
shell: pwsh
- name: Download artifact A without decompressing
uses: ./
with:
name: Artifact-A-${{ matrix.runs-on }}
path: skip-decompress-test
skip-decompress: "true"
- name: Verify skip-decompress download
run: |
$rawFile = "skip-decompress-test/Artifact-A-${{ matrix.runs-on }}.zip"
if(!(Test-Path -path $rawFile))
{
Write-Error "Expected raw artifact file does not exist at $rawFile"
}
$fileInfo = Get-Item $rawFile
if($fileInfo.Length -eq 0)
{
Write-Error "Downloaded artifact file is empty"
}
Write-Host "Successfully downloaded artifact without decompressing: $rawFile (size: $($fileInfo.Length) bytes)"
shell: pwsh
- name: Create and upload archived artifact with misleading extension
run: |
mkdir -p path/to/extension-test
echo '{"key": "value"}' > path/to/extension-test/data.json
shell: bash
- uses: actions/upload-artifact@v4
with:
name: report.txt-${{ matrix.runs-on }}.json
path: path/to/extension-test/data.json
- name: Download misleading-extension artifact without decompressing
uses: ./
with:
name: report.txt-${{ matrix.runs-on }}.json
path: ext-test/raw
skip-decompress: "true"
- name: Verify downloaded file has .zip extension appended
run: |
expected="ext-test/raw/report.txt-${{ matrix.runs-on }}.json.zip"
if [ -f "$expected" ]; then
echo "PASS: Downloaded file has .zip appended: $expected"
else
echo "FAIL: Expected $expected but got:"
ls -al ext-test/raw/
exit 1
fi
shell: bash
- name: Create artifacts with CJK names
run: |
mkdir -p path/to/cjk-artifacts
# Chinese - 土 (U+571F) known to fail, 日 (U+65E5) known to work
echo "Content for 土" > "path/to/cjk-artifacts/file-土-${{ matrix.runs-on }}.txt"
echo "Content for 中文测试" > "path/to/cjk-artifacts/file-中文测试-${{ matrix.runs-on }}.txt"
# Japanese - katakana and kanji
echo "Content for テスト" > "path/to/cjk-artifacts/file-テスト-${{ matrix.runs-on }}.txt"
echo "Content for 東京タワー" > "path/to/cjk-artifacts/file-東京タワー-${{ matrix.runs-on }}.txt"
# Korean - Hangul
echo "Content for 테스트" > "path/to/cjk-artifacts/file-테스트-${{ matrix.runs-on }}.txt"
echo "Content for 서울시" > "path/to/cjk-artifacts/file-서울시-${{ matrix.runs-on }}.txt"
shell: bash
- name: Upload CJK artifact - Chinese 土
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-土-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Chinese 中文测试
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-中文测试-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Japanese テスト
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-テスト-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Japanese 東京タワー
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-東京タワー-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Korean 테스트
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-테스트-${{ matrix.runs-on }}.txt
- name: Upload CJK artifact - Korean 서울시
uses: actions/upload-artifact@v7
with:
archive: "false"
path: path/to/cjk-artifacts/file-서울시-${{ matrix.runs-on }}.txt
- name: Download CJK artifact - Chinese 土
uses: ./
with:
name: file-土-${{ matrix.runs-on }}.txt
path: cjk-download/土
- name: Download CJK artifact - Chinese 中文测试
uses: ./
with:
name: file-中文测试-${{ matrix.runs-on }}.txt
path: cjk-download/中文测试
- name: Download CJK artifact - Japanese テスト
uses: ./
with:
name: file-テスト-${{ matrix.runs-on }}.txt
path: cjk-download/テスト
- name: Download CJK artifact - Japanese 東京タワー
uses: ./
with:
name: file-東京タワー-${{ matrix.runs-on }}.txt
path: cjk-download/東京タワー
- name: Download CJK artifact - Korean 테스트
uses: ./
with:
name: file-테스트-${{ matrix.runs-on }}.txt
path: cjk-download/테스트
- name: Download CJK artifact - Korean 서울시
uses: ./
with:
name: file-서울시-${{ matrix.runs-on }}.txt
path: cjk-download/서울시
- name: Verify CJK artifact downloads
run: |
set -e
fail=0
check_file() {
local file="$1"
local expected="$2"
if [ ! -f "$file" ]; then
echo "FAIL: Missing file: $file"
fail=1
return
fi
actual=$(cat "$file")
if [ "$actual" != "$expected" ]; then
echo "FAIL: Content mismatch in $file"
echo " Expected: '$expected'"
echo " Got: '$actual'"
fail=1
return
fi
echo "PASS: $file"
}
echo "=== Chinese ==="
check_file "cjk-download/土/file-土-${{ matrix.runs-on }}.txt" "Content for 土"
check_file "cjk-download/中文测试/file-中文测试-${{ matrix.runs-on }}.txt" "Content for 中文测试"
echo "=== Japanese ==="
check_file "cjk-download/テスト/file-テスト-${{ matrix.runs-on }}.txt" "Content for テスト"
check_file "cjk-download/東京タワー/file-東京タワー-${{ matrix.runs-on }}.txt" "Content for 東京タワー"
echo "=== Korean ==="
check_file "cjk-download/테스트/file-테스트-${{ matrix.runs-on }}.txt" "Content for 테스트"
check_file "cjk-download/서울시/file-서울시-${{ matrix.runs-on }}.txt" "Content for 서울시"
if [ "$fail" -ne 0 ]; then
echo "Some CJK artifact checks failed"
ls -alR cjk-download/ || true
exit 1
fi
echo "All CJK artifact downloads verified successfully"
shell: bash
strategy:
fail-fast: "false"
matrix:
runs-on:
- macos-latest
...
|
build
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844749
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40299
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Install default version Cosign and test presence i Install default version Cosign and test presence in path (macos-latest)...
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_default_version_cosign_action:
name: Install default version Cosign and test presence in path (macos-latest)
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- name: Install Cosign
uses: ./
- name: Check install!
run: cosign version
- name: Check root directory
run: |
if [[ $(git diff --stat) != '' ]]; then
echo 'should be clean'
exit 1
else
exit 0
fi
shell: bash
strategy:
matrix:
os:
- macos-latest
permissions:
contents: read
permissions: {}
...
|
test_default_version_cosign_action
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40304
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Test unsupported version v0.5.0 fails on macos-lat Test unsupported version v0.5.0 fails on macos-latest...
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_unsupported_versions:
name: Test unsupported version v0.5.0 fails on macos-latest
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- id: install-attempt
name: Install Cosign (should fail)
uses: ./
with:
cosign-release: ${{ matrix.version }}
continue-on-error: true
- name: Verify installation failed
run: |
if [[ "${{ steps.install-attempt.outcome }}" == "failure" ]]; then
echo "✅ Installation correctly failed for unsupported version ${{ matrix.version }}"
else
echo "❌ Installation should have failed for unsupported version ${{ matrix.version }}"
exit 1
fi
shell: bash
strategy:
fail-fast: "false"
matrix:
os:
- macos-latest
version:
- v0.5.0
permissions: {}
permissions: {}
...
|
test_unsupported_versions
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40305
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Test unsupported version v0.6.0 fails on macos-lat Test unsupported version v0.6.0 fails on macos-latest...
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_unsupported_versions:
name: Test unsupported version v0.6.0 fails on macos-latest
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- id: install-attempt
name: Install Cosign (should fail)
uses: ./
with:
cosign-release: ${{ matrix.version }}
continue-on-error: true
- name: Verify installation failed
run: |
if [[ "${{ steps.install-attempt.outcome }}" == "failure" ]]; then
echo "✅ Installation correctly failed for unsupported version ${{ matrix.version }}"
else
echo "❌ Installation should have failed for unsupported version ${{ matrix.version }}"
exit 1
fi
shell: bash
strategy:
fail-fast: "false"
matrix:
os:
- macos-latest
version:
- v0.6.0
permissions: {}
permissions: {}
...
|
test_unsupported_versions
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40306
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Test unsupported version v1.0.0 fails on macos-lat Test unsupported version v1.0.0 fails on macos-latest...
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_unsupported_versions:
name: Test unsupported version v1.0.0 fails on macos-latest
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- id: install-attempt
name: Install Cosign (should fail)
uses: ./
with:
cosign-release: ${{ matrix.version }}
continue-on-error: true
- name: Verify installation failed
run: |
if [[ "${{ steps.install-attempt.outcome }}" == "failure" ]]; then
echo "✅ Installation correctly failed for unsupported version ${{ matrix.version }}"
else
echo "❌ Installation should have failed for unsupported version ${{ matrix.version }}"
exit 1
fi
shell: bash
strategy:
fail-fast: "false"
matrix:
os:
- macos-latest
version:
- v1.0.0
permissions: {}
permissions: {}
...
|
test_unsupported_versions
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40307
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Test unsupported version v1.13.6 fails on macos-la Test unsupported version v1.13.6 fails on macos-latest...
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_unsupported_versions:
name: Test unsupported version v1.13.6 fails on macos-latest
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- id: install-attempt
name: Install Cosign (should fail)
uses: ./
with:
cosign-release: ${{ matrix.version }}
continue-on-error: true
- name: Verify installation failed
run: |
if [[ "${{ steps.install-attempt.outcome }}" == "failure" ]]; then
echo "✅ Installation correctly failed for unsupported version ${{ matrix.version }}"
else
echo "❌ Installation should have failed for unsupported version ${{ matrix.version }}"
exit 1
fi
shell: bash
strategy:
fail-fast: "false"
matrix:
os:
- macos-latest
version:
- v1.13.6
permissions: {}
permissions: {}
...
|
test_unsupported_versions
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40316
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Try to install a wrong Cosign (macos-latest)
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_cosign_action_wrong:
name: Try to install a wrong Cosign (macos-latest)
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- name: Install Cosign
uses: ./
with:
cosign-release: honk
continue-on-error: true
strategy:
fail-fast: "false"
matrix:
os:
- macos-latest
permissions:
contents: read
permissions: {}
...
|
test_cosign_action_wrong
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40319
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Install Custom Cosign and test presence in path (m Install Custom Cosign and test presence in path (macos-latest)...
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_cosign_action_custom_dir:
name: Install Custom Cosign and test presence in path (macos-latest)
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- name: Install Cosign
uses: ./
with:
install-dir: $HOME/.cosigntest
- name: Check install!
run: cosign version
- name: Check install dir!
run: |
[[ $(dirname "$(which cosign)") == "$HOME/.cosigntest" ]]
shell: bash
- name: Check root directory
run: |
[[ -z $(git diff --stat) ]]
shell: bash
strategy:
fail-fast: "false"
matrix:
os:
- macos-latest
permissions:
contents: read
permissions: {}
...
|
test_cosign_action_custom_dir
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
40323
|
25749
|
140
|
5
|
af595e623eec1ede52d6322f53b635d5def0a95a
|
0
|
Try to install cosign with go 1.26 on macos-latest
|
0
|
name: test-cosign
"on":
pull_request:
name: test-cosign
"on":
pull_request:
push:
branches:
- 'main'
jobs:
test_cosign_with_go_install:
name: Try to install cosign with go 1.26 on macos-latest
runs-on: macos-latest
steps:
- uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1
with:
persist-credentials: "false"
- uses: actions/setup-go@4a3601121dd01d1626a1e23e37211e3254c1c06c
with:
check-latest: "true"
go-version: ${{ matrix.go_version }}
- name: Install Cosign
uses: ./
with:
cosign-release: main
- name: Check install!
run: cosign version
strategy:
fail-fast: "false"
matrix:
go_version:
- "1.26"
os:
- macos-latest
permissions:
contents: read
permissions: {}
...
|
test_cosign_with_go_install
|
null
|
["macos-latest"]
|
0
|
3
|
0
|
1791950475
|
1791844750
|
1791950483
|
|
0
|
|
0
|
Edit
Delete
|
|
16
|
15
|
2
|
2
|
061edb11a5fd660934c3b57491d585077b3805cf
|
0
|
deploy
|
0
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: self-hosted
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["self-hosted"]
|
0
|
3
|
0
|
1770875534
|
1770874771
|
1770875534
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
1
|
1
|
3
|
4
|
f6b6a3099bdc2128ef1527c4935844f1e9358dac
|
0
|
build
|
1
|
name: Android CI
"on":
push:
b name: Android CI
"on":
push:
branches: [master, main, develop]
tags: ['v*']
pull_request:
branches: [master, main]
jobs:
build:
name: build
runs-on: ubuntu-latest
steps:
- name: Checkout code
uses: actions/checkout@v3
- name: Set up JDK 11
uses: actions/setup-java@v3
with:
cache: gradle
distribution: temurin
java-version: "11"
- name: Grant execute permission for gradlew
run: chmod +x gradlew
- name: Build Debug APK
run: ./gradlew assembleDebug
- if: startsWith(github.ref, 'refs/tags/')
name: Build Release AAR
run: ./gradlew assembleRelease
- name: Upload Debug artifacts
uses: actions/upload-artifact@v3
with:
name: debug-build
path: build/outputs/
retention-days: "7"
- if: startsWith(github.ref, 'refs/tags/')
name: Upload Release artifacts
uses: actions/upload-artifact@v3
with:
name: release-build
path: build/outputs/
retention-days: "30"
...
|
build
|
null
|
["ubuntu-latest"]
|
1
|
2
|
1770362250
|
1770362250
|
1770360030
|
1770362251
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
2
|
1
|
3
|
4
|
f6b6a3099bdc2128ef1527c4935844f1e9358dac
|
0
|
test
|
0
|
name: Android CI
"on":
push:
b name: Android CI
"on":
push:
branches: [master, main, develop]
tags: ['v*']
pull_request:
branches: [master, main]
jobs:
test:
name: test
runs-on: ubuntu-latest
steps:
- name: Checkout code
uses: actions/checkout@v3
- name: Set up JDK 11
uses: actions/setup-java@v3
with:
cache: gradle
distribution: temurin
java-version: "11"
- name: Grant execute permission for gradlew
run: chmod +x gradlew
- name: Run unit tests
run: ./gradlew test
- name: Run lint check
run: ./gradlew lint
continue-on-error: true
- if: always()
name: Upload test results
uses: actions/upload-artifact@v3
with:
name: test-results
path: |
build/reports/tests/
build/reports/lint-results.html
retention-days: "7"
...
|
test
|
["build"]
|
["ubuntu-latest"]
|
0
|
4
|
0
|
0
|
1770360030
|
1770362252
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
3
|
2
|
2
|
2
|
eeeea65072a95dcb64d00de48d403734fce896f6
|
0
|
hello
|
1
|
name: Hello World
"on": [push]
jobs:
h name: Hello World
"on": [push]
jobs:
hello:
name: hello
runs-on: ubuntu-latest
steps:
- name: Say hello
run: echo "Hello, Gitea CI/CD!"
- name: Show environment info
run: |
echo "Runner OS: $(uname -a)"
echo "Current directory: $(pwd)"
echo "Files in repo:"
ls -la
...
|
hello
|
null
|
["ubuntu-latest"]
|
2
|
2
|
1770362886
|
1770362886
|
1770362885
|
1770362887
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
4
|
3
|
2
|
2
|
74f43da4be5c177e5405226efa5f1f7303a4b2bb
|
0
|
hello
|
1
|
name: Hello World
"on": [push]
jobs:
h name: Hello World
"on": [push]
jobs:
hello:
name: hello
runs-on: ubuntu-latest
steps:
- name: Say hello
run: echo "Hello, Gitea CI/CD!"
- name: Show environment info
run: |
echo "Runner OS: $(uname -a)"
echo "Current directory: $(pwd)"
echo "Files in repo:"
ls -la
...
|
hello
|
null
|
["ubuntu-latest"]
|
3
|
2
|
1770363134
|
1770363134
|
1770363133
|
1770363135
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
5
|
4
|
2
|
2
|
648e5d31ec4f94695fa3cb16e919fa6f6b504503
|
0
|
hello
|
1
|
name: Hello World
"on": [push]
jobs:
h name: Hello World
"on": [push]
jobs:
hello:
name: hello
runs-on: ubuntu-latest
steps:
- name: Say hello
run: echo "Hello, Gitea CI/CD!"
- name: Show environment info
run: |
echo "Runner OS: $(uname -a)"
echo "Current directory: $(pwd)"
echo "Files in repo:"
ls -la
...
|
hello
|
null
|
["ubuntu-latest"]
|
4
|
1
|
1770364149
|
1770364238
|
1770364148
|
1770364238
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
6
|
5
|
2
|
2
|
7d4d920368182d2222ed4f7dd18933b433f88ec2
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- uses: checkout@v1
- name: Prepare rsync password file
run: |
# 将密码写入文件（rsync 要求权限为 600）
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\n# 构建 rsync 目标地址\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }} # 如: 192.168.1.100
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }} # 如: ahead_rsync_user
RSYNC_MODULE: ftp # 对应 rsyncd.conf 中的 [ftp]
- name: Clean up password file (optional but safe)
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
5
|
2
|
1770800269
|
1770800277
|
1770800268
|
1770800277
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
7
|
6
|
2
|
2
|
ce36f880dce499ef2d3c804c32a1b8ba04ffbcc2
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- uses: checkout@v1
- name: Prepare rsync password file
run: |
# 将密码写入文件（rsync 要求权限为 600）
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\n# 构建 rsync 目标地址\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }} # 如: 192.168.1.100
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }} # 如: ahead_rsync_user
RSYNC_MODULE: ftp # 对应 rsyncd.conf 中的 [ftp]
- name: Clean up password file (optional but safe)
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
6
|
2
|
1770800339
|
1770800343
|
1770800337
|
1770800344
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
8
|
7
|
2
|
2
|
a931e51a2c8c1e80aab44673de58b17e14e7b34e
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- uses: gitea/checkout@v1
- name: Prepare rsync password file
run: |
# 将密码写入文件（rsync 要求权限为 600）
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\n# 构建 rsync 目标地址\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }} # 如: 192.168.1.100
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }} # 如: ahead_rsync_user
RSYNC_MODULE: ftp # 对应 rsyncd.conf 中的 [ftp]
- name: Clean up password file (optional but safe)
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
7
|
2
|
1770800679
|
1770800684
|
1770800679
|
1770800685
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
9
|
8
|
2
|
2
|
265f1b4a557b2a64464bc98e1e418e0e01298d31
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- uses: gitea/checkout@v1
- name: Prepare rsync password file
run: |
# 将密码写入文件（rsync 要求权限为 600）
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\n# 构建 rsync 目标地址\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }} # 如: 192.168.1.100
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }} # 如: ahead_rsync_user
RSYNC_MODULE: ftp # 对应 rsyncd.conf 中的 [ftp]
- name: Clean up password file (optional but safe)
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
8
|
2
|
1770800735
|
1770800740
|
1770800734
|
1770800740
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
10
|
9
|
2
|
2
|
9ea10aada78365404579933ba4df771f312ad652
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- uses: https://gitea.com/gitea/checkout@v1
- name: Prepare rsync password file
run: |
# 将密码写入文件（rsync 要求权限为 600）
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\n# 构建 rsync 目标地址\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }} # 如: 192.168.1.100
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }} # 如: ahead_rsync_user
RSYNC_MODULE: ftp # 对应 rsyncd.conf 中的 [ftp]
- name: Clean up password file (optional but safe)
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
9
|
2
|
1770801383
|
1770801388
|
1770801383
|
1770801388
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
11
|
10
|
2
|
2
|
bbba1e40297c5378b23d53b0161cc6a10581ccf1
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- uses: https://gitea.com/gitea/checkout@v1
- name: Prepare rsync password file
run: |
# 将密码写入文件（rsync 要求权限为 600）
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\n# 构建 rsync 目标地址\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }} # 如: 192.168.1.100
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }} # 如: ahead_rsync_user
RSYNC_MODULE: ftp # 对应 rsyncd.conf 中的 [ftp]
- name: Clean up password file (optional but safe)
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
10
|
2
|
1770801411
|
1770801416
|
1770801410
|
1770801416
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
12
|
11
|
2
|
2
|
86003a30fcfeb3966084629ff6b4530693a642fa
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
echo "Cloning repository: ${GITHUB_SERVER_URL}/${GITHUB_REPOSITORY}"
git init
git remote add origin "${GITHUB_SERVER_URL}/${GITHUB_REPOSITORY}.git"
git fetch --depth=1 origin "${GITHUB_SHA}"
git checkout "${GITHUB_SHA}"
env:
# Gitea Actions 自动提供这些环境变量
GITHUB_SERVER_URL: ${{ env.GITHUB_SERVER_URL }} # 会是 https://gitea.g-hi.com
GITHUB_REPOSITORY: ${{ env.GITHUB_REPOSITORY }}
GITHUB_SHA: ${{ env.GITHUB_SHA }}
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} # Gitea 自动生成的临时 token
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- name: Clean up password file
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
11
|
2
|
1770801593
|
1770801598
|
1770801592
|
1770801598
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
13
|
12
|
2
|
2
|
4dfa289ffffceaeca9d550f8e594eb56a3c414be
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: "echo \"\U0001F50D Cloning repository from: ${GITEA_SERVER_URL}/${GITEA_REPOSITORY}\"\n\n# 检查关键变量是否存在\nif [ -z \"$GITEA_SERVER_URL\" ] || [ -z \"$GITEA_REPOSITORY\" ] || [ -z \"$GITEA_SHA\" ]; then\n echo \"❌ Error: Missing required Gitea environment variables.\"\n exit 1\nfi\n\n# 移除 URL 中的 https:// 前缀，以便拼接 token\nHOST_AND_PATH=\"${GITEA_SERVER_URL#https://}\"\nREPO_URL=\"https://${GITEA_TOKEN}@${HOST_AND_PATH}/${GITEA_REPOSITORY}.git\"\n\ngit init\ngit remote add origin \"$REPO_URL\"\ngit fetch --depth=1 origin \"$GITEA_SHA\"\ngit checkout \"$GITEA_SHA\"\n"
env:
GITEA_SERVER_URL: ${{ env.GITEA_SERVER_URL }}
GITEA_REPOSITORY: ${{ env.GITEA_REPOSITORY }}
GITEA_SHA: ${{ env.GITEA_SHA }}
GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }} # ← 必须在 Secrets 中配置
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested. Syncing all files...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync (changed files only)...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- name: Clean up password file
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
12
|
2
|
1770801845
|
1770801850
|
1770801845
|
1770801850
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
14
|
13
|
2
|
2
|
646aa1dc79636bb90dbfec0b6b9fb9aef11c7556
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 构建完整 URL
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
if [ -z "$GITHUB_REPOSITORY" ] || [ -z "$GITHUB_SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${GITHUB_REPOSITORY}.git"
echo "Cloning from: $REPO_URL (SHA: $GITHUB_SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$GITHUB_SHA"
git checkout "$GITHUB_SHA"
env:
# 从 Secrets 获取你的 Gitea 地址（避免依赖 env.GITEA_SERVER_URL）
GITEA_HOST: ${{ secrets.GITEAS_HOST }} # 例如: gitea.g-hi.com
GITHUB_REPOSITORY: ${{ env.GITHUB_REPOSITORY }}
GITHUB_SHA: ${{ env.GITHUB_SHA }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
13
|
2
|
1770802313
|
1770802318
|
1770802312
|
1770802318
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
15
|
14
|
2
|
2
|
b895cbd8b188037f0f5dbfb0fcfef056dfc36ebc
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
14
|
2
|
1770802531
|
1770802550
|
1770802529
|
1770802550
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
22
|
21
|
2
|
2
|
ac9571bc40f603c832247b982b1f4181e6a3e297
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
15
|
2
|
1770878387
|
1770878407
|
1770878387
|
1770878407
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
23
|
22
|
2
|
2
|
9bbc92b4f9f21e5efef46a53f1d89fd7e752d327
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
16
|
2
|
1770882286
|
1770882302
|
1770882162
|
1770882303
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
24
|
23
|
2
|
2
|
2ac24ff0484bc4a60c5bfed9495a83a4e337f27b
|
0
|
deploy
|
0
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
0
|
3
|
0
|
1770884630
|
1770882563
|
1770884630
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
25
|
24
|
2
|
2
|
f98b8cb65887cd9ea97ec74d24dca6f43e8f15ff
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
17
|
2
|
1770885475
|
1770885478
|
1770885473
|
1770885478
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
26
|
25
|
2
|
2
|
978522e3a6160abd60eefca39accc9791fcd4ff0
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
if [ -z "$RSYNC_PASSWORD" ]; then
echo "❌ TEST_RSYNC_SECRETS is empty or not set!"
ls -la /tmp/
exit 1
fi
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created (size: $(wc -c < /tmp/rsync.pass) bytes)"
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
18
|
2
|
1770885693
|
1770885696
|
1770885693
|
1770885697
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
27
|
26
|
2
|
2
|
db265e985719016459800733229be1943b1efaef
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
if [ -z "$RSYNC_PASSWORD" ]; then
echo "❌ TEST_RSYNC_SECRETS is empty or not set!"
ls -la /tmp/
exit 1
fi
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created (size: $(wc -c < /tmp/rsync.pass) bytes)"
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
19
|
2
|
1770885756
|
1770885759
|
1770885756
|
1770885760
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
28
|
27
|
2
|
2
|
99892b593bb6a634103b6fd62b6ca5665f93f2a5
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
if [ -z "$RSYNC_PASSWORD" ]; then
echo "❌ TEST_RSYNC_SECRETS is empty or not set!"
ls -la /tmp/
exit 1
fi
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created (size: $(wc -c < /tmp/rsync.pass) bytes)"
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
20
|
2
|
1770886440
|
1770886443
|
1770886439
|
1770886443
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
29
|
28
|
2
|
2
|
bf96a4043fd32b24b5270f87165856c672c826ef
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
if [ -z "$RSYNC_PASSWORD" ]; then
echo "❌ TEST_RSYNC_SECRETS is empty or not set!"
ls -la /tmp/
exit 1
fi
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created (size: $(wc -c < /tmp/rsync.pass) bytes)"
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
21
|
2
|
1770886491
|
1770886494
|
1770886490
|
1770886494
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
30
|
29
|
2
|
2
|
6ccdfdf78088ebb3a5e0bd64de10053b9c881f60
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file
run: |
if [ -z "$RSYNC_PASSWORD" ]; then
echo "❌ TEST_RSYNC_SECRETS is empty or not set!"
ls -la /tmp/
exit 1
fi
echo "$RSYNC_PASSWORD" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created (size: $(wc -c < /tmp/rsync.pass) bytes)"
env:
RSYNC_PASSWORD: ${{ secrets.TEST_RSYNC_SECRETS }}
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: ${{ secrets.TEST_RSYNC_HOST }}
RSYNC_USER: ${{ secrets.TEST_RSYNC_USER }}
RSYNC_MODULE: ftp
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
22
|
2
|
1770886646
|
1770886649
|
1770886646
|
1770886649
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
31
|
30
|
2
|
2
|
c00cc2f80acf2f84906f0fc4dd7ec19e4d3016ab
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "testrsync123" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'testrsync123'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
23
|
2
|
1770887199
|
1770887201
|
1770887199
|
1770887202
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
32
|
31
|
2
|
2
|
db8eda4b4696ee119fdb6d2f03804ccdf33ebcbb
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "m9QNiLJ8LIqBozXwmsoKdNXa23xia34R" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'm9QNiLJ8LIqBozXwmsoKdNXa23xia34R'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
24
|
2
|
1770887288
|
1770887291
|
1770887286
|
1770887291
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
33
|
32
|
2
|
2
|
5b02704031563f678f5ef2cb09446cc806b2d32b
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "m9QNiLJ8LIqBozXwmsoKdNXa23xia34R" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'm9QNiLJ8LIqBozXwmsoKdNXa23xia34R'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
25
|
2
|
1770888366
|
1770888372
|
1770888366
|
1770888372
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
34
|
33
|
2
|
2
|
1263656b62ab1dad57c56f8d004cb615f4ed02ba
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "m9QNiLJ8LIqBozXwmsoKdNXa23xia34R" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'm9QNiLJ8LIqBozXwmsoKdNXa23xia34R'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete --no-group \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
26
|
2
|
1770888557
|
1770888565
|
1770888557
|
1770888565
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
35
|
34
|
2
|
2
|
65caede278c2e8e14c0612ec8d8f7d26aec24ec9
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "m9QNiLJ8LIqBozXwmsoKdNXa23xia34R" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'm9QNiLJ8LIqBozXwmsoKdNXa23xia34R'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n \n /usr/bin/rsync -avz --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
27
|
2
|
1770889156
|
1770889164
|
1770889156
|
1770889164
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
36
|
35
|
2
|
2
|
400093d9f9f3977b244da942667525d369ac684b
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "m9QNiLJ8LIqBozXwmsoKdNXa23xia34R" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'm9QNiLJ8LIqBozXwmsoKdNXa23xia34R'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --no-owner --no-group --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n\n /usr/bin/rsync -avz --no-owner --no-group --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
28
|
1
|
1770889916
|
1770889924
|
1770889915
|
1770889924
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|
|
37
|
36
|
2
|
2
|
d64df3fe0cf829fa7895d0e15cc72debc562ab2c
|
0
|
deploy
|
1
|
name: Smart Deploy via Rsync Daemon
"on": name: Smart Deploy via Rsync Daemon
"on": [push]
jobs:
deploy:
name: deploy
runs-on: ubuntu-latest
steps:
- name: Checkout code manually
run: |
# 调试输出
echo "GITEA_HOST: $GITEA_HOST"
echo "GITHUB_REPOSITORY: ${{ github.repository }}"
echo "GITHUB_SHA: ${{ github.sha }}"
if [ -z "$GITEA_HOST" ]; then
echo "❌ GITEA_HOST secret is missing!"
exit 1
fi
# 使用 github 上下文变量
REPO="${{ github.repository }}"
SHA="${{ github.sha }}"
if [ -z "$REPO" ] || [ -z "$SHA" ]; then
echo "❌ Missing GITHUB_REPOSITORY or GITHUB_SHA"
exit 1
fi
REPO_URL="https://${GITEA_TOKEN}@${GITEA_HOST}/${REPO}.git"
echo "Cloning from: ${REPO_URL//${GITEA_TOKEN}/***REDACTED***} (SHA: $SHA)"
git init
git remote add origin "$REPO_URL"
git fetch --depth=1 origin "$SHA"
git checkout "$SHA"
env:
GITEA_HOST: ${{ secrets.GITEAS_HOST }}
GITEA_TOKEN: ${{ secrets.GITEAS_TOKEN }}
- name: Prepare rsync password file (HARDCODED for test)
run: |
echo "m9QNiLJ8LIqBozXwmsoKdNXa23xia34R" > /tmp/rsync.pass
chmod 600 /tmp/rsync.pass
echo "✅ /tmp/rsync.pass created with password 'm9QNiLJ8LIqBozXwmsoKdNXa23xia34R'"
- name: Get commit message and decide sync mode
run: "COMMIT_MSG=$(git log -1 --pretty=%B | head -n1)\necho \"Commit message: $COMMIT_MSG\"\n\nRSYNC_TARGET=\"rsync://${RSYNC_USER}@${RSYNC_HOST}/${RSYNC_MODULE}/\"\n\nif [[ \"$COMMIT_MSG\" == *\"全量同步\"* ]] || [[ \"$COMMIT_MSG\" == *\"full sync\"* ]]; then\n echo \"\U0001F50D Full sync requested...\"\n /usr/bin/rsync -avz --no-owner --no-group --delete \\\n --exclude='.git' \\\n --exclude='.gitea' \\\n --exclude='node_modules/' \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\nelse\n echo \"\U0001F504 Incremental sync...\"\n\n if git rev-parse HEAD~1 >/dev/null 2>&1; then\n git diff --name-only HEAD~1 HEAD > /tmp/changed.txt\n else\n find . -type f -not -path './.git/*' -not -path './.gitea/*' | sed 's|^\\./||' > /tmp/changed.txt\n fi\n\n if [ -s /tmp/changed.txt ]; then\n echo \"Files to sync:\"\n cat /tmp/changed.txt\n\n /usr/bin/rsync -avz --no-owner --no-group --relative \\\n --files-from=/tmp/changed.txt \\\n --password-file=/tmp/rsync.pass \\\n ./ \\\n \"$RSYNC_TARGET\"\n else\n echo \"✅ No files changed.\"\n fi\nfi\n"
env:
RSYNC_HOST: "172.17.70.241"
RSYNC_USER: "ahead_rsync_user"
RSYNC_MODULE: "ftp"
- if: always()
name: Clean up
run: rm -f /tmp/rsync.pass
...
|
deploy
|
null
|
["ubuntu-latest"]
|
29
|
1
|
1770890123
|
1770890130
|
1770890122
|
1770890131
|
NULL
|
NULL
|
|
0
|
Edit
Delete
|